PRESET REMOTE CONTROL

It is possible to control this unit and other YAMAHA A/V components using the remote control supplied with this unit. It is also possible to control components from other manufacturers (or some YAMAHA components) by setting the proper manufacturer code (a signal assigned to each manufacturer and component).

Note

•For the notes on batteries, operating distance and names and functions of the remote control, refer to each description in this manual.

Component Selector Buttons

There are eight component selector buttons. Press one of these buttons which corresponds to the component you want to control with the remote control. For example, if you press CD on the component selector, the remote control is set to the CD operation mode, allowing the CD player to be controlled.

AMP(TUNER)

You can perform the basic operations of this unit.

CD

The code for a YAMAHA CD player is factory set.

DVD/LD & DVD MENU

An LD player can be controlled in

the DVD/LD mode. A DVD player can be controlled in the DVD/LD and DVD MENU modes. The code for a YAMAHA DVD player is factory set.

Notes

TAPE/MD

The code for a YAMAHA MD deck is factory set. (The code for the YAMAHA CD recorder and tape deck can also be set.)

VCR

A VCR can be controlled.

TV

A TV can be controlled.

CBL/SAT

A cable TV or satellite tuner can be controlled.

•The button functions on the remote control differ depending on the operation mode. Refer to the following pages for details.

•When shipped from the factory, the YAMAHA manufacturer codes listed on page 49 are set for each dial position. If unable to operate your YAMAHA A/V component, please try using another YAMAHA code.

Controlling the Components

Connected to This Unit

■Example: To control YAMAHA CD player

5

7

2

 

3

4

6

1 Make sure that the volume is set at the minimum level.

2 Press AMP(TUNER) on the component selector.

3 Turn on the power.

4 Press CD on the input selector.

5 Press CD on the component selector.

6 Press p.

Refer to “Description of Each Mode” for the CD player operation buttons.

7 Adjust the volume.

If you set the remote control with the manufacturer codes

listed from page i at the end of this manual, you

can control other brands of components. Refer to “Setting the Manufacturer Code” for details.

ADVANCEDOPERA TION

English

43