Yamaha RX-V520RDS Using the Remote Control

eEFFECT

Press this button to turn on or off the effect speakers (center and rear).

rPRG+, PRG–

Press these buttons to select a DSP program.

Once you press SET MENU, these buttons are used for selecting the SET MENU item.

tSET MENU

Press this button to select the items in the SET MENU.

CONTROLS AND FUNCTIONS

Using the Remote Control

Remote control	INTRODUCTION
Remote control
sensor
	Within approximately 6 m
	(20 feet)

The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the infrared sensor during operation. When the sensor is covered or there is a large object between the remote control and the sensor, the sensor cannot receive signals. The sensor may not be able to receive signals properly when it is exposed to direct sunlight or a strong artificial light (such as a fluorescent or strobe light). In this case, change the direction of the light or reposition the unit to avoid direct lighting.

Notes

•Handle the remote control with care.

•Do not spill water, tea or other liquids on the remote control.

•Do not drop the remote control.

•Do not leave or store the remote control in the following conditions:

–high humidity or temperature such as near a heater, stove or bath;

–dusty places; or

–extremely low temperature.

English

7

Contents

Natural Sound AV Receiver Ampli-tuner audio-vidéo CAUTION: READ THIS BEFORE OPERATING YOUR UNIT CONTENTS FEATURES GETTING STARTED Checking the Package Contents Battery Installation in the Remote Control Battery Replacement CONTROLS AND FUNCTIONS Front Panel Page Remote Control Using the Remote Control Display Rear Panel SPEAKER SETUP Speakers to Be Used Speaker Placement CONNECTIONS Before Connecting Components Connecting Audio Components Connecting an External Decoder Page Connecting Video Components Page Connecting Speakers ■Subwoofer connection IMPEDANCE SELECTOR Switch Connecting the Power Supply Cords ADJUSTING THE SPEAKER BALANCE Before You Start Adjusting Using the Test Tone Page PLAYING A SOURCE ■To mute the sound ■When you have finished using this unit ■Notes on the digital signal ■BGV (background video) function Input Modes and Indications Selecting a DSP Program Canceling the Sound Effect (turning off the effect speakers) TUNING Connecting the Antennas Automatic Tuning Manual Tuning Automatic Preset Tuning (for RDS stations only) Manual Preset Tuning To Recall a Preset Station Exchanging Preset Stations RECEIVING RDS STATIONS Description of RDS Data Changing the RDS Mode PTY SEEK Function EON Function RECORDING A SOURCE SET MENU Adjusting the Items on the SET MENU 1SPEAKER SET (speaker mode settings) 2HP TONE CTRL (headphone tone control) 3 I/O ASSIGN 4 INPUT MODE (initial input mode) 5 DOLBY D. SET (Dolby Digital set) 6 DTS SET (DTS LFE level) 7 SP DLY TIME (center delay) 8DISPLAY SET 9 MEM. GUARD (memory guard) DELAY TIME AND SPEAKER OUTPUT LEVELS Delay Time Sound Output Level of the Center Right Rear and Left Rear Speakers and Subwoofer Adjusting Method SLEEP TIMER Setting the SLEEP Timer Canceling the SLEEP Timer PRESET REMOTE CONTROL Component Selector Buttons Controlling the Components Connected to This Unit Description of Each Mode ■CD MODE ■DVD/LD MODE ■DVD MENU MODE ■ VCR MODE ■ CBL/SAT MODE ■TV MODE Setting the Manufacturer Code Returning to the Factory Setting SOUND FIELD PROGRAM Hi-FiDSP Programs CINEMA DSP Programs ■For movie programs: Nos. 7 to ■MOVIE THEATER 1 and TROUBLESHOOTING Page Page ■Tuner ■Remote control SPECIFICATIONS GLOSSARY ■S VIDEO signal ■PCM (Linear PCM) ■Sampling frequency and number of quantized bits ■I/O ASSIGN (SET MENU) INDEX Page Page Page Page Page Page L Analog signal O Optical signal S Video signal Video signal Signal flow