TROUBLESHOOTING

Problem

Cause

Remedy

Refer to

page

 

 

 

 

 

No sound from the effect

The sound effect is off.

Press EFFECT to turn it on.

25

speakers.

 

 

 

A Dolby Surround, Dolby Digital or DTS

Select another DSP program.

50, 51

 

 

 

 

decoding DSP program is being used with

 

 

 

 

material not encoded with Dolby Surround,

 

 

 

 

Dolby Digital or DTS.

 

 

 

 

 

 

 

 

 

A 96-kHz sampling digital signal is being input

 

22

 

 

to this unit.

 

 

 

 

 

 

 

No sound from the

The output level of the center speaker is set to

Raise the level of the center speaker.

40

center speaker.

minimum.

 

 

 

 

 

 

 

 

 

“CENTER SP” in the SET MENU is set to

Select the appropriate mode for your center

36

 

 

NON.

speaker.

 

 

 

One of the Hi-Fi DSP programs (1 to 4) has been

Select another DSP program.

50, 51

 

 

selected.

 

 

 

 

 

 

 

 

 

The source encoded with a Dolby Digital or

 

—

 

 

DTS signal does not have a center channel

 

 

 

 

signal.

 

 

 

 

 

 

No sound from the rear

The output level of the rear speakers is set to

Raise the output level of the rear speakers.

40

speakers.

minimum.

 

 

 

 

 

 

 

 

 

A monaural source is being played with the

Select another DSP program.

50, 51

 

 

program 9.

 

 

 

 

 

 

No sound from the

“BASS OUT” in the SET MENU is set to

Select SWFR or BOTH.

37

subwoofer.

MAIN when a Dolby Digital or DTS signal is

 

 

 

 

being played.

 

 

 

 

 

 

 

 

 

“BASS OUT” in the SET MENU is set to

Select BOTH.

37

 

 

SWFR or MAIN when a 2-channel source is

 

 

 

 

being played.

 

 

 

 

The source does not contain low bass signals

 

—

 

 

(90 Hz and below).

 

 

 

 

 

 

Poor bass reproduction.

“BASS OUT” in the SET MENU is set to

Select MAIN.

37

 

 

SWFR or BOTH and your system does not

 

 

 

 

include a subwoofer.

 

 

 

 

 

 

 

 

 

The output mode for each speaker (main, center

Select the appropriate output mode for each

36, 37

 

 

or rear) in the SET MENU does not match your

speaker based on the size of the speakers in

 

 

 

speaker configuration.

your configuration.

 

 

 

 

 

A “humming” sound can

Incorrect cable connections.

Firmly connect the audio plugs. If the problem

12 – 15

be heard.

 

persists, the cables may be defective.

 

 

 

 

 

 

54