DELAY TIME AND SPEAKER OUTPUT LEVELS

When using the digital sound field processor with the Dolby Pro Logic decoder, Dolby Digital decoder or DTS decoder, you can adjust the delay time between the main sound and sound effect, and each speaker’s output level as you wish.

Delay Time

You can adjust the time difference between the beginning of the sound from the main speakers and the beginning of the sound effect from the rear speakers. The larger the value, the later the sound effect is generated. The delay time can be individually adjusted to all DSP programs.

Notes

Adding too much delay will cause an unnatural effect with some sources.

The sound is momentarily interrupted while adjusting the delay time.

 

 

Program

Preset value (ms)

 

 

 

1.

CONCERT HALL

45

 

 

 

2.

JAZZ CLUB

30

 

 

 

3.

ROCK CONCERT

15

 

 

 

4.

DISCO

26

 

 

 

 

 

 

5CH STEREO

2

 

 

 

 

 

 

GAME

36

 

 

 

 

 

5.

TV SPORTS

10

 

 

 

6.

MONO MOVIE

69

 

 

 

7.

70 mm SPECTACLE

23

 

 

 

 

 

 

DGTL SPECTACLE

13

 

 

 

 

 

 

 

 

DTS SPECTACLE

13

 

 

 

 

 

 

70 mm SCI-FI

20

 

 

 

 

 

 

DGTL SCI-FI

16

 

 

 

 

 

 

DTS SCI-FI

16

 

 

 

 

 

 

70 mm ADVENTURE

20

8.

 

 

DGTL ADVENTURE

15

 

 

 

 

 

 

 

 

DTS ADVENTURE

15

 

 

 

 

 

 

70 mm GENERAL

20

 

 

 

 

 

 

DGTL GENERAL

15

 

 

 

 

 

 

DTS GENERAL

15

 

 

 

 

 

 

PRO LOGIC/NORMAL

20

9.

 

 

DOLBY DIGITAL/NORMAL

5

 

 

 

 

 

 

DTS DIGITAL SUR./NORMAL

5

 

 

 

 

 

 

PRO LOGIC/ENHANCED

20

 

 

 

 

 

 

DOLBY DIGITAL/ENHANCED

5

 

 

 

 

 

 

DTS DIGITAL SUR./ENHANCED

5

 

 

 

 

 

 

Sound Output Level of the Center,

Right Rear and Left Rear Speakers,

and Subwoofer

If desired, you can adjust the sound output level of each speaker even if it has already been adjusted in “ADJUSTING THE SPEAKER BALANCE” procedure.

Notes

If “CENTER SP” in the SET MENU is set to the NON position, the sound output level of the center speaker cannot be adjusted. This is because the center channel sound is automatically output from the right and left main speakers.

Once the sound output level has been adjusted, the level will be the same for all DSP programs.

Speaker

Preset value (dB)

 

 

Center

0

 

 

Right rear

0

 

 

Left rear

0

 

 

Subwoofer

0

 

 

40