Yamaha V365 ;BASIC SETUP, 20 En, SLEEP, (SIGNAL INFO), ■Using the sleep timer, To cancel the sleep timer, ■Displaying the input source information, SLEEP 90min

Playback

y

•“NIGHT:CINEMA” and “NIGHT:MUSIC” adjustments are stored independently.

Notes

•You cannot use the night listening modes in the following cases:

–when the component connected to the MULTI CH INPUT jacks is selected as the input source.

–when headphones are connected to the PHONES jack.

–when the sampling frequency of the input sources are higher than 48 kHz.

•The effect of night listening modes may vary depending on the input source and surround sound settings you use.

■Displaying the input source information(SIGNAL INFO)

You can display the format, sampling frequency, channel, bit rate and flag data of the current input signal.

1Press hAMP and then press kMENU on the remote control.

“BASIC SETUP” appears on the front panel display.

;BASIC SETUP

2Press lk/ nrepeatedly to select “SIGNAL INFO” and then press lENTER.3Press lk/ nto switch the displayed information.

The following information about the input source appears on the front panel display.

Choice	Description
FORMAT	Signal format.
SAMPLING	The number of samples per second
	taken from a continuous signal to
	make discrete signals.
CHANNEL	The number of source channels in the
	input signal (front/surround/LFE).
BITRATE	The number of bits passing a given
	point per second.
FLAG	Flag data encoded in DTS, Dolby
	Digital, or PCM signals that cue this
	unit to automatically switch decoders.

4Press kMENU on the remote control again to exit from “SET MENU.”

■Using the sleep timer

Use this feature to automatically set this unit to the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording from a source.

Press hAMP and then press xSLEEP repeatedly to set the amount of time.The sleep timer setting changes as follows.

SLEEP 120min	SLEEP 90min
SLEEP OFF SLEEP 30min	SLEEP 60min

Once the sleep timer is set, the SLEEP indicator lights up on the front panel display, and the display returns to the selected sound field program.

To cancel the sleep timerPress xSLEEP on the remote control repeatedly to select “SLEEP OFF.”

y

•If you set the main zone to the standby mode, the sleep timer is automatically canceled.

■Playing video sources in the background

You can combine a video image from a video source with sound from an audio source. For example, you can enjoy listening to classical music while viewing beautiful scenery from the video source on the video monitor.

Press the input selector buttons (f) on the remote control to select a video source and then an audio source.

CD MD/CD-R TUNER

Audio sources

DVD DTV/CBL DVR

Video sources

V-AUX/DOCK

DVD DTV/CBL DVR

Video sources

V-AUX/DOCK

MULTI CH IN

9Audio sources

20 En