LFE signals output

Choice

Subwoofer

Front speakers

Other speakers

 

 

 

 

BOTH*

Output

No output

No output

 

 

 

 

SWFR

Output

No output

No output

 

 

 

 

FRONT

No output

Output

No output

 

 

 

 

Low-frequency signals output

Choice

Subwoofer

Front speakers

Other speakers

 

 

 

 

BOTH*

*1

*2

*3

 

 

 

 

SWFR

*4

*3

*3

 

 

 

 

FRONT

No output

*1

*3

 

 

 

 

Notes

*1 Outputs the low-frequency signals of the front channels and other speakers to “SML” or “NONE.”

*2 Always output the low-frequency signals of the front channels.

*3 Output the low-frequency signals if the sizes of speakers are set to “LARGE” (or “LRG”).

*4 Output the low-frequency signals of the speakers set to “SML.”

■Crossover CROSSOVER

Use this feature to select a crossover frequency of all the speakers set to “SML” (or “SMALL”) or to “NONE” in “SPEAKER SET” (see pages 31 and 32).

Choices: 40Hz, 60Hz, 80Hz*, 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz

Note

•All frequencies below the selected frequency will be sent to the subwoofer or to the speakers set to “LRG” (or “LARGE”) in “SPEAKER SET” (see pages 31 and 32).

■ Subwoofer phase SWFR PHASE

Use this feature to switch the phase of your subwoofer if bass sounds are lacking or unclear.

ChoiceFunction

NRM* Does not reverse the phase of your subwoofer.

REV Sets the phase of your subwoofer to reverse.

Speaker level B)SP LEVEL
Use this feature to manually adjust the output level of each speaker.
Control range: –10 to 0* to +10 dB
Control step: 1 dB

SP LEVEL

Adjusted speaker

 

 

FL

Front left speaker

 

 

FR

Front right speaker

 

 

C

Center speaker

 

 

SL

Surround left speaker

 

 

SR

Surround right speaker

 

 

SWFR

Subwoofer

 

 

Set menu

Notes

•The available speaker channels differ depending on the setting of the speakers.

•This does not affect recorded material.

Speaker distance C)SP DISTANCE

Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel. All sounds would be adjusted to arrive at the listening position at the same time regardless of distance from each speaker.

■Unit UNIT

ChoiceCondition

meters When you adjust speaker distances in meters.

feet* When you adjust speaker distances in feet.

■Speaker distances
Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)
Control step: 0.10 m (0.5 ft) Initial setting:
FRONT L/FRONT R/SWFR: 3.00 m (10.0 ft)
CENTER: 2.60 m (8.5 ft)
SUR. L/SUR. R: 2.40 m (8.0 ft)

SP DISTANCE

Adjusted speaker

 

 

FRONT L

Front left speaker

 

 

FRONT R

Front right speaker

 

 

CENTER

Center speaker

 

 

SUR. L

Surround left speaker

 

 

SUR. R

Surround right speaker

 

 

SWFR

Subwoofer

 

 

Note

•The available speaker channels differ depending on the setting of the speakers.

Center graphic equalizer D)CENTER GEQ

Use this feature to adjust the built-in 5-frequency band (100Hz, 300Hz, 1kHz, 3kHz and 10kHz) graphic equalizer for the center channel so that the tonal quality of the center speaker matches that of the front speakers. Control range: –6.0 to 0* to +6.0 dB

Control step: 0.5 dB

y

•Press lk/ nto select a frequency band and ll/ hto adjust the selected frequency band.

•You can make adjustment while listening to the currently source or a test tone.

Following is an example where “100Hz” is selected as the frequency band.

100Hz---- 0

OPERATION

ADVANCED

 

 

English

33 En