Troubleshooting
| Problem | Cause | Remedy | See |
| page | |||
|
|
|
| |
|
|
|
|
|
| The desired station | The signal is weak or the antenna | Tighten the AM loop antenna connections and | — |
| cannot be tuned into | connections are loose. | orient it for the best reception. |
|
| with the automatic |
|
|
|
| Use the manual tuning method. | |||
| tuning method. |
| ||
|
|
|
| |
|
|
|
|
|
AM There are continuous | Noises result from lightning, | Use an outdoor antenna and a ground wire. | — | |
| crackling and hissing | fluorescent lamps, motors, thermostats | This will help somewhat, but it is difficult to |
|
| noises. | and other electrical equipment. | eliminate all noise. |
|
|
|
|
|
|
| There are buzzing and | A TV set is being used nearby. | Move this unit away from the TV set. | — |
| whining noises. |
|
|
|
|
|
|
|
|
Note
•In case of a transmission error without a status message appearing on the front panel display, check the connection to your iPod (see page 14).
Status message | Cause | Remedy | See | |
page | ||||
|
|
| ||
|
|
|
|
Connect error | There is a problem with the signal path |
| from your iPod to this unit. |
Turn off this unit and reconnect the Yamaha iPod | |
universal dock to the DOCK terminal of this unit. |
|
|
|
|
| Try resetting your iPod. | — |
|
|
|
|
Unknown iPod | The iPod being used is not supported by | Only iPod (Click and Wheel), iPod nano, and iPod | — |
| this unit. | mini are supported. |
|
|
|
|
|
iPod connected | Your iPod is properly stationed in a |
|
|
| Yamaha iPod universal dock (such as |
|
|
|
|
| |
| DOCK terminal of this unit, and the |
|
|
| connection between your iPod and this |
|
|
| unit is complete. |
|
|
|
|
|
|
Disconnected | Your iPod was removed from a Yamaha |
| iPod universal dock (such as |
| sold separately) connected to the DOCK |
| terminal of this unit. |
Station your iPod back in a Yamaha iPod universal |
dock (such as
Status message | Cause | Remedy | See | |
page | ||||
|
|
| ||
|
|
|
| |
Searching... | The Bluetooth receiver and the Bluetooth |
|
| |
| component is in the middle of the pairing. |
|
| |
|
|
|
| |
| The Bluetooth receiver and the Bluetooth |
|
| |
| component is in the middle of establishing |
|
| |
| the connection. |
|
| |
|
|
|
| |
Completed | The paring is completed. |
|
| |
|
|
|
| |
Canceled | The paring is canceled. |
|
| |
|
|
|
| |
BT connected | The connection between the Bluetooth |
|
| |
| Wireless Audio Receiver (such as YBA- |
|
| |
| 10, sold separately) and the Bluetooth |
|
| |
| component is established. |
|
| |
|
|
|
| |
Disconnected | The Bluetooth component is disconnected |
|
| |
| from the Bluetooth receiver (such as |
|
| |
|
|
| ||
|
|
|
|
No BT adapter | The Bluetooth receiver is not connected to |
| the DOCK terminal. |
Connect the Bluetooth Wireless Audio Receiver (such | |
as |
|