Troubleshooting

■Remote control

Problem

Cause

Remedy

See

page

 

 

 

 

 

 

 

The remote control

Wrong distance or angle.

The remote control functions within a maximum

8

does not work nor

 

range of 6 m (20 ft) and no more than 30 degrees off-

 

function properly.

 

axis from the front panel.

 

 

 

 

 

 

Direct sunlight or lighting (from an

Reposition this unit.

—

 

inverter type of fluorescent lamp, etc.) is

 

 

 

striking the remote control sensor of this

 

 

 

unit.

 

 

 

 

 

 

 

The batteries are weak.

Replace all batteries.

8

 

 

 

 

 

The remote control code is not correctly

Set the remote control code correctly using “List of

39

 

set.

remote control codes” at the end of this manual.

 

 

 

 

 

 

 

Try setting another code for the same manufacturer

39

 

 

using “List of remote control codes” at the end of this

 

 

 

manual.

 

 

 

 

 

Even if the remote control code is correctly set, there are some models that do not respond to the remote control.

■Resetting the system

Use this feature to reset all the parameters of this unit to the initial factory settings. For details about the procedure of resetting the system, see “Initializing” in “Advanced setup” on page 40.

INFORMATION

ADDITIONAL

 

 

English

45 En