![](/images/backgrounds/20123/20123-6034x1.png)
Using Bluetooth™ components
You can connect a Bluetooth Wireless Audio Receiver (such as
Pairing the Bluetooth™ receiver and your Bluetooth™ component
Pairing must be performed when you use a Bluetooth component with the Bluetooth receiver connected to this unit for the first time or if the pairing data has been deleted. “Pairing” refers to the operation of registering a Bluetooth component for Bluetooth communications.
y
•You need to perform the pairing operation only when you use the Bluetooth component with the Bluetooth receiver for the first time.
•You need to perform the pairing operations both on this unit and on the Bluetooth component. If necessary, refer to operating instructions of the Bluetooth component.
There are two pairing methods: pairing by using “START PAIRING” in “SET MENU” and quick pairing.
■Pairing by using “SET MENU”Use this feature to perform pairing of this unit and the video monitor. Select “START PAIRING” in “INPUT MENU.” See page 36 for details.
■Quick pairingTo ensure security, a time limit of 8 minutes is set for the pairing operation. You are recommended to read and fully understand all the instructions before starting.
1Press hAMP and then press NINPUT l/ hrepeatedly (or press
Once the Bluetooth receiver starts pairing, “Searching...” appears for a moment. While the Bluetooth receiver is in the pairing mode, DOCK indicator flashes on the front panel display.
y
•To cancel the pairing, press GBAND (or jBAND LEVEL TITLE) again.
Note
5Select the Bluetooth receiver in the Bluetooth device list and then enter the pass key “0000” to the Bluetooth component.
When the pairing is completed successfully, “Completed” appears on the front panel display.
Note
•The Bluetooth Wireless Audio Receiver can be paired with up to eight other components. When pairing is conducted successfully with a ninth component and the pairing data is registered, the pairing data for the least recently used other component is cleared.
Playback of the Bluetooth™ component
1Press hAMP and then press NINPUT l/ hrepeatedly (or press
When the connected Bluetooth receiver detects the Bluetooth component, “BT connected” and the DOCK indicator appears on the front panel display.
y
•When you press lENTER on the remote control, the connected Bluetooth receiver searches and connect to the last connected Bluetooth component. If the Bluetooth receiver cannot find the Bluetooth component, “Not found” appears on the front panel display.
•To disconnect the Bluetooth receiver from the Bluetooth component, press nRETURN.
•If the Bluetooth receiver is not connected to the DOCK terminal of this unit, “No BT adapter” appears on the front panel display.
4Check that the Bluetooth component detects the Bluetooth receiver.If the Bluetooth component detects the Bluetooth receiver,