Yamaha V365 Advanced setup, 40 En, Press, Caution, ■Initializing PRESET, ■ Speaker impedance SP IMP, (U.S.A. and Canada models only), Choices: 8ΩMIN*, 6ΩMIN

Advanced setup

This unit has additional menus that are displayed on the front panel display. The advanced setup menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated by (*) in this following parameter) to reflect the needs of your listening environment.

Notes

•Only ASTANDBY/ON, LPROGRAM l/ hand

MSTRAIGHT are effective while you are using the advanced setup menu.

•No other operations can be made while you are using the advanced setup menu.

•The advanced setup menu is only available on the front panel display.

1Press ASTANDBY/ON on the front panel to set this unit to the standby mode.2Press and hold KTONE CONTROL and then press ASTANDBY/ON to turn on this unit.

This unit turns on, and the advanced setup menu appears on the front panel display.

3Press LPROGRAM l/ hto select the parameter you want to adjust.The name of the selected parameter appears on the front panel display.4Press MSTRAIGHT repeatedly to change the selected parameter setting.

5Press ASTANDBY/ON to confirm your selection and set this unit to the standby mode.

y

•The settings you made are reflected next time you turn on this unit.

■ Speaker impedance SP IMP.(U.S.A. and Canada models only)

Caution

If you are to use 6 ohm speakers, set “SP IMP.” to “6ΩMIN” as follows BEFORE using this unit.

Use this feature to set the speaker impedance of this unit so that it matches that of your speakers.

Choices: 8ΩMIN*, 6ΩMIN•Select “8ΩMIN” to set the speaker impedance to 8 Ω .•Select “6ΩMIN” to set the speaker impedance to 6 Ω .

SP IMP.	Speaker	Impedance level
	Front (A or B)	The impedance of each
8ΩMIN		speaker must be 8 Ω or
	Center
		higher.
	Surround
	Front (A or B)	The impedance of each
6ΩMIN		speaker must be 6 Ω or
	Center
		higher.
	Surround

■Initializing PRESET

Use this feature to reset all the parameters of this unit to the initial factory settings.

Choices: CANCEL*, RESET•Select “CANCEL” not to reset any parameters of this unit.•Select “RESET” to reset the parameters of this unit.

Notes

•This setting completely resets all the parameters of this unit including the set menu parameters. However, the advanced setup menu parameters will not be initialized.

•The initial factory settings are activated next time you turn on this unit.

40 En