FM/AM tuning
y
•You can select the preset station group and the preset station number where the first received station will be stored by pressing EA/B/C/D/E and then FPRESET/TUNING l/ h.
Notes
•Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number.
•Only FM stations with sufficient signal strength are stored automatically by automatic preset tuning. If the station you want to store is weak in signal strength, tune it manually and store it as described in “Manual station preset” on this page.
Manual station preset
Use this feature to store the FM or AM stations manually.1Tune into a station.
See page 27 for using instructions.2Press HMEMORY.
The MEMORY indicator flashes on the front panel display for approximately 30 seconds.
3Press EA/B/C/D/E and FPRESET/TUNING l/ hrepeatedly to select a preset station group and number (A1 to E8) while the MEMORY indicator is flashing.
Check that the colon (:) appears on the front panel display.•To select a higher preset station group and number, press FPRESET/TUNING h.•To select a lower preset station group and number, press FPRESET/TUNING l.Flashes
TUNED MEMORY
C3:AM 630 kHz
Preset station group and number
4Press HMEMORY while the MEMORY indicator is flashing.
The station band and frequency appear on the front panel display with the preset station group and number you have selected.
TUNED
C3:AM 630 kHz
The displayed station has been stored as C3.
Selecting preset stations
You can tune into any desired station simply by selecting the preset station group and number under which it is stored.
When performing this operation with the remote control, press fTUNER to select “TUNER” as the input source.
1Press EA/B/C/D/E (or ll/ h) repeatedly to select the desired preset station group (A to E).
The preset station group letter appears on the front panel display and changes each time you press the button.
2Press FPRESET/TUNING l/ h(or lk/ n) to select the desired preset station number (1 to 8).
The preset station group and number, along with station band and frequency, appear on the front panel display.
E1:FM 87.5 MHz
y
•You can select the desired preset station number (1 to 8) directly by pressing the numeric buttons (y).
Exchanging preset stations
You can exchange the assignments of two preset stations between the two. The example below describes the procedure to exchange preset station “E1” and “A5.”
1Select preset station “E1” using EA/B/C/D/E and FPRESET/TUNING l/ h.
See “Selecting preset stations” on this page.2Press and hold DEDIT PRESET/TUNING for more than 3 seconds.
“E1” and the MEMORY indicator flash on the front panel display.Flashes
MEMORY
E1:FM 87.5 MHz
Flashes
3Select preset station “A5” using EA/B/C/D/E and FPRESET/TUNING l/ h.
“A5” and the MEMORY indicator flash on the front panel display.See “Selecting preset stations” on this page.
Flashes
MEMORY
A5:FM 90.5 MHz
Flashes
4Press DEDIT PRESET/TUNING again.
“EXCHANGE