Control function operation
EJU31024
Watercraft control functions
EJU41910
Remote control transmitter
The Yamaha Security System and Low RPM Mode settings can be selected by operating the remote control transmitter. (See page 32 for Yamaha Security System setting procedures and page 38 for Low RPM Mode activation procedures.)
1Remote control transmitter
Since the watercraft is programmed to recognize the internal code from this transmitter only, the settings can only be selected with this transmitter.
If you accidentally lose your remote control transmitter or if it is not operating properly, contact a Yamaha dealer.
When operating the watercraft, always keep the transmitter with you so that it is not lost.
VXR: This watercraft is equipped with a transmitter holder in the beverage holder.
1
1Transmitter holder
ECJ00752
NOTICE
●The remote control transmitter is not completely waterproof. Do not sub- merge the transmitter or operate it un- derwater. If the transmitter is submerged, dry it with a soft, dry cloth, and then check that it is operating prop- erly. If the transmitter is not operating properly, contact a Yamaha dealer.
●Keep the remote control transmitter away from high temperatures and do not place it in direct sunlight.
●Do not drop the remote control transmit- ter, subject it to strong shocks, or place any heavy items on it.
●Use a soft, dry cloth to clean the remote control transmitter. Do not use deter- gent, alcohol, or other chemicals.
●Do not attempt to disassemble the re- mote control transmitter yourself. Other- wise, the transmitter may not operate properly. If the transmitter needs a new battery, contact a Yamaha dealer. Refer to local hazardous waste regulations when disposing of transmitter batteries.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
31