Instrument operation
To switch the speedometer display units: Push the select button for at least 1 second, within 10 seconds after the multifunction information center is activated. The speedometer display changes.
1
TIP:
The hour meter is selected at the Yamaha factory.
1
2
1Speedometer
2Select button
EJU31463
Tachometer
The tachometer shows the engine speed. The outer numbers ⋅ 1000 r/min and display segments on the meter show the engine speed.
1
1Hour meter/voltmeter
Hour meter
The hour meter shows the total number of hours that the engine has been running since the watercraft was new.
TIP:
The elapsed time will be kept even if the battery terminals have been disconnected.
To switch to the hour meter from the voltme- ter:
Push the select button for at least 1 second after the multifunction information center is activated for more than 10 seconds. The display switches to the hour meter from the voltmeter.
1
1Tachometer
EJU31555
Hour meter/voltmeter
The hour meter/voltmeter has both an hour meter function and a voltmeter function. By switching the meter, it can be used as either an hour meter or a voltmeter.
2
1Hour meter
2Select button
Voltmeter
The voltmeter shows the battery voltage.
41