Operation and handling requirements

Fuel tank capacity:

60 L (15.9 US gal, 13.2 Imp.gal)

(6)Stop filling when the fuel level reaches approximately 50 mm (2 in) from the top of the fuel tank. Do not overfill the fuel tank. Because fuel expands when it heats up, heat from the engine or the sun can cause fuel to spill out of the fuel tank. Do not leave the watercraft with a full tank in direct sunlight.

1

1Approximately 50 mm (2 in) from top of the fuel tank

(7)Wipe up any spilled fuel immediately with a dry cloth.

(8)Securely install the fuel filler cap by tight- ening it until it clicks.

(9)Securely install the seat in its original po- sition.

EJU40290

Engine oil requirements

EJU41860

Engine oil

ECJ00281

NOTICE

Use only 4-stroke engine oil. Usage of 2- stroke engine oil could result in severe engine damage.

Recommended engine oil:

YAMALUBE 4W Recommended engine oil type:

SAE 10W-30, 10W-40, 20W-40, 20W- 50

Recommended engine oil grade: API SE,SF,SG,SH,SJ,SL

Checking the engine oil level

EWJ00340

WARNING

Engine oil is extremely hot immediately after the engine is turned off. Coming in contact with or getting any engine oil on your clothes could result in burns.

ECJ01001

NOTICE

Make sure that debris and water do not enter the oil filler hole. Debris and water in the engine oil can cause serious engine damage.

To check the engine oil level:

(1)Place the watercraft in a precisely level position on land with the engine stopped. If the engine was running, allow the en- gine oil to settle by waiting 5 minutes or more before checking the oil level.

(2)Remove the seat. (See page 45 for seat removal and installation procedures.)

52