Operation and handling requirements

(3) Remove the dipstick and wipe it clean.

1

1Dipstick

(4)Insert the dipstick back into the dipstick tube completely. Remove the dipstick again and make sure that the engine oil level is between the minimum and maxi- mum level marks.

1

2

1Maximum level mark

2Minimum level mark

(5)If the engine oil level is significantly above the maximum level mark, consult a Yamaha dealer. If the engine oil level is below the minimum level mark, add en- gine oil.

(6)Loosen the engine oil filler cap and re- move it.

1

1Engine oil filler cap

(7)Slowly add engine oil.

TIP:

The difference between the minimum and maximum level marks on the dipstick is equal to approximately 1 L (1.06 US qt, 0.88 Imp. qt) of engine oil.

(8)Wait approximately 5 minutes to allow the engine oil to settle, and then check the engine oil level again.

(9)Repeat steps 3–8 until the engine oil is at the proper level.

(10)Securely install the engine oil filler cap by tightening it until it stops.

(11)Securely install the seat in its original po- sition.

53