Operation

is attached correctly. If the engine shut-off cord (lanyard) is not attached correctly, it may not pull free when the operator falls off, allowing the water- craft to continue to run and cause an

accident. [EWJ00581]

1 2

3

1Clip

2Engine shut-off switch

3Engine shut-off cord (lanyard)

(4)With the throttle lever released, push the start switch (green button) to start the en- gine. (See page 33 for information on op- erating the start switch.)

avoid. A collision could result in severe injury or death. [EWJ00601]

EJU32872

Leaving the watercraft

If leaving the watercraft, remove the clip from the engine shut-off switch to prevent accidental starting or unauthorized operation by children or others.

STOP

START

EJU32862

Stopping the engine

Release the throttle lever, and then push the engine stop switch (red button) to stop the en- gine. WARNING! You need throttle to steer.

Shutting the engine off can cause you to hit an obstacle you are attempting to

EJU40221

Operating the watercraft

When the shift lever is in the forward position and the engine is running, the watercraft will move forward. The watercraft will move forward at trolling speed even if the throttle lever

68