Pre-operation checks

EJU41440

Hood check

Push down on the rear of the hood and make sure that it is securely closed.

EJU40144

Post-launch checks

Perform the post-launch checks in the pre-operation checklist while the watercraft is in the water and the engine is running.

To perform the post-launch checks:

(1)Launch the watercraft. (See page 67 for information on launching the watercraft.)

(2)Perform the checks and make sure that there are no malfunctioning items or oth-

er problems.

EJU40552

Cooling water pilot outlet check

Make sure that water is discharged from the cooling water pilot outlet while the engine is running. (See page 35 for information on the cooling water pilot outlet.)

EJU32713

Multifunction information center check Make sure that the multifunction information center operates properly. (See page 40 for information on proper operation of the multi- function information center.)

EJU40171

Engine idling speed check

Start the engine and warm it up. Use the tachometer in the multifunction information center to make sure that the engine idling speed is not significantly above or below the specified range.

Engine idling speed: 1300 ±100 r/min

65