Instrument operation
EJU41850
Multifunction information
center
The multifunction information center displays various watercraft information.
1 2 | 3 | 4 5 |
EJU35024
Information display
The information display shows watercraft operating conditions.
1 | 2 | 3 | 4 |
1“SECURITY” indicator light
2Select button
3Information display
4
5“WARNING” indicator light
Multifunction information center initial operation
When the multifunction information center is activated, all of the display segments and the “SECURITY” indicator light come on. After 2 seconds, the warning indicators in the information display go off, and then the center starts to operate normally.
5 6 7 8
1Tachometer
2Speedometer
3Hour meter/voltmeter
4Fuel level meter
5Check engine warning indicator
6Engine overheat warning indicator
7Oil pressure warning indicator
8Fuel level warning indicator
EJU31503
Speedometer
The speedometer shows the watercraft speed against water.
By switching the display units, the speed can be shown in kilometers per hour “km/h” or miles per hour “mph”.
TIP:
The “SECURITY” indicator light will go off when the engine is started.
Multifunction information center standby state
If the multifunction information center does not receive any operation input within 25 seconds after the engine stops, the center will turn off and enter a standby state. When the engine is started again, the displays return to their state before the center turned off, and then the center starts to operate normally.
TIP:
“mph” is selected as the display unit at the Yamaha factory.
1
1Speedometer
40