About Digital Effects (Reverb/Chorus/DSP)When DSP type Is Selected as a Insertion Effect

The three PSR-530 effects will be connected as shown below.

The signal will enter reverb and chorus according to the send level set for each, and the signal with the effect applied will be output according to the return level that is set. The reverb and chorus send levels are set for each part (track) with the Revoice mode.The reverb and chorus return level value is set in common for all the parts.

The stereo panning is available for each of the reverb and chorus at the output for their signals. Using MIDI, the panning position for the effect can be set (page 115).

If a “Send Chorus to Reverb” (page 115) signal is transmitted to the PSR-530 from an external MIDI device, a signal can be sent from the chorus to the reverb (connected in series).

The signal will enter DSP with the Dry/Wet (send level) that is set, and a signal with the effect applied will be output. The DSP Dry/Wet (send level) is set for only R1 voice with the Revoice mode. The DSP return level cannot be set.

Variation is valid for

only one part.

variation part

 

 

DSP Dry/Wet

 

dry

DSP

volume

expression

 

rev send

R1 Voice

 

PAN

DSP on/off

 

cho send

 

 

dry

 

volume

expression

 

 

rev send

R2 Voice

 

PAN

 

 

cho send

 

 

dry

 

volume

expression

 

 

rev send

L Voice

 

PAN

 

 

cho send

All tracks that

 

 

can be revoiced.

 

 

 

 

dry

DSP

volume

expression

 

rev send

MIDI Channel 1

 

PAN

variation on/off

 

cho send

MIDI Channel 16

The bold lines are stereo lines.

reverb reverb

pan return

REVERB PAN

send chorus to reverb

CHORUS

PAN

 

OUTPUT

chorus

chorus

pan

return

 

DRY LINE

107