¢QQQQQQQQQQQQQQQ,,,,,,,,,,,,,,,¢¢¢¢¢¢¢¢¢¢¢¢¢¢

MIDI Functions

■Bulk Data Send

This function causes the contents of the registration, user song, user style and user pad memory to be transmitted via the MIDI OUT connector. This data can be saved to memory or disk via a MIDI sequence recorder or MIDI data recorder, and then reloaded when required. The bulk data can also be sent directly to a second PSR-530.

To send the bulk data select the “BlkSnd?” function, then press the [+] (YES) button. “Sure?” will appear on the display. Press [+] (YES) again to begin transmission of the bulk data. “BkSnd:Rg” (registration data), “BkSnd:Sg” (user song data), “BkSnd:Pd” (user pad data) and then “BkSnd:Cs” (user style data) will appear on the display during transmission. “End” will appear on the display briefly when the transmission has finished.

•A bulk dump transmission can be stopped at any time by pressing the [–] (NO) button.

•No other operations can be performed during bulk dump transmission.

•During Style/Song/Multi Pad playback or in one of the Record modes, the display shows “- - -: BlkSnd” indicating that you cannot execute the Bulk Data send operation.

YESBlkSnd? Sure?

7 8 9

0

●Receiving Bulk Data

The PSR-530 will automatically receive compatible bulk data from an external MIDI device as long as no auto accompaniment, multi pad, or song recording/playback operation is in progress. “BkRcv” will appear on the display during reception, then “End” will appear briefly when all data has been received.

BkRcvEnd

•No other operations can be performed during bulk dump reception.

•If an error is encountered dur- ing bulk data reception, “Blk Err” will appear on the display, and registration, user song, user style and user pad memory will be cleared.

•When a bulk dump is re- ceived, the received data re- places any data that was pre- viously in the PSR-530 memory.

•The bulk receive messages are rejected during playback/ recording.

■Initial Data Send

Transmits all current panel settings to a second PSR-530 or a MIDI data storage device. To send the initial data, select the “InitSnd?” function. Press the

[+](YES) to begin transmission of the initial data.

YESInitSnd?

If you want to have the song play back with the panel settings used for recording, execute the Initial Data Send function before recording the performance on the PSR-530 to an external sequencer.

•During Style/Song/Multi Pad palyback or in one of the Record modes, the display shows “- - -: InitSnd?” indicat- ing that you cannot execute the initial data send operation.

95