¢QQQQQQQQQQQQQQ,,,,,,,,,,,,,,¢¢¢¢¢¢¢¢¢¢¢¢¢

Digital Effects

Then use the SUB MENU [] and [] buttons to select “Harmony”. After a few seconds the name of the currently selected HARMONY type will appear on top line of the display.

Harmony

01Duet

You can also jump di- rectly to the DIGITAL EFFECT HARMONY TYPE function by pressing and holding the [HARMONY] but- ton for a few seconds.

2 Select a Harmony Type

Use the [–]and [+] buttons, number buttons, or data dial to select the desired HARMONY type (the name of the selected HARMONY type will appear on the top line of the display).

Adjusting the Harmony Volume

The volume of the harmony sound in relation to the keyboard sound can be adjusted for HARMONY types 1 through 10 as follows (HARMONY types 11 through 22 are not affected):

1 Select the Digital Effect “HarmVol” Function

Use the MENU [] and [] buttons to move the triangular indicator in the display next to “DIGITAL EFFECT”, then use the SUB MENU [] and [] buttons to select “HarmVol”. The current harmony volume setting will appear to the left of “HarmVol” on the display.

100HarmVol

2 Adjust the Harmony Volume

Use the [–]and [+] buttons, number buttons, or data dial to adjust the harmony volume as required. The range is from “0” to “127” — “0” is minimum (no sound) and “127” is maximum volume.

When the Voice Set function is ON (page 85), the Harmony Vol- ume may change ac- cording to the se- lected R1 panel voice.

44