¢QQQQQQQQQQQQQQQ,,,,,,,,,,,,,,,¢¢¢¢¢¢¢¢¢¢¢¢¢¢

MIDI Functions

•When the HOST SELECT switch is set in the “MIDI”position, input and output in theTO HOST switch is ignored.

•When using a Macintosh series computer, set the MIDI interface clock setting in the application software to match the setting of the MIDI interface you are using. For details, carefully read the owner’s manual for the software you are using.

■Connect using the TO HOST terminal

Connect the serial port of the personal computer (RS-232C terminal or RS-422 terminal) to the TO HOST terminal of the PSR-530.

For the connection cable, use the cable below (sold separately) that matches the personal computer type.

Macintosh Series

Connect the RS-422 terminal (modem or printer terminal) on the computer to theTO HOST terminal on the PSR-530 using a serial cable (system peripheral cable, 8 bit). Set the PSR-530 HOST SELECT switch in the “MAC” position.

PC-1 PC-2

mini DIN 8-pin

mini DIN 8-pin

Mac

MIDI

•Set the MIDI interface clock in the sequencer software you are using to 1 MHz. For details, carefully read the owner’s manual for the software you are using.

IBM-PC/AT Series

Connect the RS-232C terminal on the computer to the TO HOST terminal on the PSR-530 using a serial cable (D-SUB 9P —> MINI DIN 8P cross cable). Set the PSR-530 HOST SELECT switch in the “PC-2” position.

 

 

 

 

 

PC-1 PC-2

 

 

 

 

 

 

 

mini DIN 8-pin

 

 

 

Mac

MIDI

 

 

 

D-SUB 9-pin

•If you connect from the PSR-530 TO HOST terminal to a personal computer, the PSR-530 will be used as a MIDI inter- face device, meaning that a specialized MIDI interface device is not necessary.

•When the HOST SE- LECT switch is set to “MAC,” “PC-1,” or “PC-2,” don’t use the MIDI IN/OUT termi- nals. (MIDI data can- not be sent or re- ceived through the MIDI terminals).

•“Host is Offline!!” will be shown on the dis- play, when the Host Select switch is set appropriately and the serial cable is con- nected to the PSR- 530 TO HOST but not to the PC’s serial port (or the cable is prop- erly connected to the PC which is currently turned off).

•When using a D-SUB 25P —> MINI DIN 8P cross cable, connect using a D-SUB 9P plug adaptor on the computer side of the cable.

mini DIN 8-pin

D-SUB 25-pin D-SUB 9-pin

For details about the necessary MIDI settings for computer and sequence software you are using, see the owner’s manuals for each of them.

Macintosh is a registered trademark of Apple Computer, Inc.

IBM PC/AT is a trademark of International Business Machines Corp.

Other company names and product names, etc. in this manual are registered trademarks or trademarks of those companies.

91