¢QQQQQQQQQQQQQQ,,,,,,,,,,,,,,¢¢¢¢¢¢¢¢¢¢¢¢¢

Transpose

This functions allow the overall pitch of the PSR-530 to be transposed up or down by a maximum of one octave in semitone increments.

Setting Transposition

Use the TRANSPOSE [] and [] buttons to set the desired degree of transposi- tion. Press either button briefly to decrement or increment by one, or hold for continuous decrementing or incrementing. The current transpose value will appear on the top line of the display for a few seconds whenever one of the TRANSPOSE buttons is pressed — during this time the [–]and [+] buttons, number buttons, or data dial can also be used to set the transpose value (the transpose value also appears continuously above “TRANSPOSE” in the display).

TRANSPOSE

-02

Transpos

 

 

VOICE L 76 VOICE R2 101 VOICE R1 1

 

-2

REPEAT

 

REVERB TRANSPOSE

The transpose range is from –12 to +12. Each step corresponds to one semitone, allowing a maximum upward or downward transposition of 1-octave. A setting of “0” produces the normal pitch.

Press the TRANS- POSE [] and [] buttons simulta- neously to instantly reset the transpose value to “0”.

The new TRANS- POSE value will take effect from the next key played.

46