Yamaha PSR-530, Yamaha MIDI Implementation Chart

*1 The tracks for each channel can be selected on the panel. See page 92 for more information.

*2 Incoming MIDI messages control the PSR-530 as 16 chan- nel multi timbral tone generator when initially shipped (factory set). The MIDI messages don’t affect the panel controls including the Panel Voice selection since they are directly sent to the tone generator of the PSR-530.However, the following MIDI messages affects the panel controls such as Panel Voice, Style, Multi Pad and Song settings:

•MIDI MASTER TUNE, MASTER TUNE (XG System Parameter).

•TRANSPOSE (XG System Parameter).

•System Exclusive Messages related to the REVERB, CHORUS and DSP EFFECT settings.

Also, the MIDI messages affect the panel settings when one of the folowing MIDI reception modes is selected.

These modes can be selected on the panel (see page 94).

MIDI Implementation Chart

rE (Remote): The Note On/Off messages received at the designated Remote (receive) channel are processed the same as the notes normally played on the keyboard.

In this mode, only the following channel messages will be recognized:

•Note On/Off

•Control Changes

Bank Select (R1 voice only)

Modulation

Volume

Expression

Sustain

Sostenute

Soft Pedal

All Notes Off

•Program Change (R1 voice only)

•Pitch Bend

Off: The MIDI channel messages will not be received at the designated channel.

*3 Though these messages will not output by playing the keyboard and changing the panel settings, they may be included in the Song or Style data and output.

123

Contents

Page SPECIAL MESSAGE SECTION SPECIFICATIONS SUBJECT TO CHANGE: NOTICE: ENVIRONMENTAL ISSUES: NAME PLATE LOCATION: PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING WARNING CAUTION ■SAVING USER DATA Congratulations Important Features GM System Level ◆Packing List Contents Page Panel Controls ■ Top Panel Controls ■ Rear Panel Controls Basic Display Operation The Display Icons Basic Display Operation REPEAT BEAT ONE TOUCH SETTING REGISTRATION 1 … 4 (Registration Memory) The Menus Shortcuts [REVERB] Reverb Setting Power Supply Connections ¢QQQQQQQQQQQQQQ,,,,,,,,,,,,,,The¢¢Demonstration¢¢¢¢¢¢¢¢¢¢¢ The Demonstration 4 Skip to the Beginning Of a Different Demo Song 02R&B 5 Stop When Done [START/STOP] ¢QQQQQQQQQQQQQQ,,,,,,,,,,,,,,Playing¢¢¢the¢PSR¢-¢530¢¢¢¢¢¢¢ The PSR-530Voices Selecting & Playing Voices [2] [3] 023SteelDrm ●The Data Dial ●The [VOICE] Button 3 Play & Adjust Volume [MASTER VOLUME] The Dual Voice Mode The Split Voice Mode Changing the SPLIT VOICE Split Point ¢QQQQQQQQQQQQQQ,,,,,,,,,,,,,,Auto¢¢Accompaniment¢¢¢¢¢¢¢¢¢¢¢ Using Auto Accompaniment Auto Accompaniment 2 Select a Style 3 Turn AUTO ACCOMPANIMENT On [ON/OFF] 4 Set the Tempo 5 Start the Accompaniment ●Straight start ●Start with an introduction followed by the MAIN A section [INTRO] ●Start with an introduction followed by the MAIN B section [MAIN/AUTO FILL] 6 Play On the Auto-accompanimentSection Of the Keyboard ●The Beat Indicator 7 Select the MAIN A and B Sections as Required [A] 8 Stop the Accompaniment [START/ STOP] [ENDING] ◆The Synchro Stop Function [SYNC STOP] Using Virtual Arranger Accompaniment Track Muting Accompaniment Volume Control Changing the Accompaniment Split Point The Auto Accompaniment Fingering Modes ●SF: The SINGLE FINGER Mode Page ●F2: The FINGERED 2 Mode ●FuL: The FULL KEYBOARD Mode ●MuL: The MULTI-FINGERMode One Touch Setting 1 Select a Style 2 Press the [ONE TOUCH SETTING] Button 3 Select a ONE TOUCH SETTING Type, as Required 4 Turn ONE TOUCH SETTING Off When Done Digital Effects Reverb Turning the Reverb Effect On or Off Selecting a Reverb Type Reverb Return Level Chorus Turning the Chorus Effect On or Off Selecting a Chorus Effect Chorus Return Level DSP Turning the DSP Effect On or Off Selecting a DSP Effect DSP Return Level Harmony Turning the Harmony Effect On or Off Selecting a Harmony Type Adjusting the Harmony Volume The Pitch Bend Wheel Setting the Pitch Bend Range Transpose Setting Transposition Registration Memory Registering the Panel Settings Recall the Registered Panel Settings The Accompaniment Freeze Function The Multi Pads Selecting a MULTI PAD Set Playing the MULTI PADs Turning the CHORD MATCH Function On/Off 1 Select the MULTI PAD Function 2 Select a CHORD MATCH Function onPad1Chd 3 Turn the CHORD MATCH Function On or Off Song Playback Song Playback Procedure Song Volume Control Play from a Specified Measure Minus-onePractice Minus-oneTrack Assignment 2 Select a MELODY Track 3 Assign a Channel to the Selected Track 05 MinusCh Repeat Play Song Recording Song Recording Procedure Page 017Measure 9 Exit From the Record Mode ◆About the Recording with the Digital Effects Applied [EX.] While the panel REVERB button is turned on: [EX.] Clearing Song Data Clearing an Entire Song Clearing Selected Melody Tracks Style Style Recording Procedure Style Recording 101UserSty1 4 If Necessary, Select a User Style Number 5 Select a Section to Record 6 Select a Track to Record 7 Select a Voice, If Necessary 8 Record 9 Stop Recording Drum Cancel Quantize Clearing User Style Data Clearing an Entire Style Clearing Selected Style Tracks Multi Pad Recording MUTI PAD Recording Procedure Multi Pad Recording 2 Select the MULTI PAD Record Mode 007UserPad1 3 If Necessary, Select a User Pad Set Number 37UserPad1 Multi Pad Recording 5 Specify Chord Match if Required 8 Record Additional Pads as Required Clearing MULTI PAD Data Clearing an Entire Pad Set Clearing Selected MULTI PADs Using Music Cartridges Cartridge Songs Cartridge Song Playback Cartridge Accompaniment Styles Revoicing Revoicing the R1, R2, and L Voices Revoicing 2 If Necessary Select a Voice to Revoice 3 Select and Edit the Revoice Parameters 100Volume 0Octave Revoicing a Style Revoicing a User Song 2 If Necessary Select a Track to Revoice 70 RevSndLv Overall Functions Overall Functions ■Touch Sensitivity 000Tuning ■Scale Tuning CSC.Note 02SongTrns ■Metronome on Metronom ■ Split Voice Split Point ■Accompaniment Split Point MIDI Functions What’s MIDI MIDI Functions ●Channel Messages ●System Messages What You Can Do with MIDI Page Connecting to a Personal Computer ■Connect using the TO HOST terminal The PSR-530MIDI Functions ●Transmit Channel ●Transmit Track ●Receive Channel ●Receive Mode ●Receiving Bulk Data Appendix PSR-530Display MENU/SUB MENU Structure PSR-530Display MENU/SUB MENU Structure Data Backup & Initialization Voice List Voice List Page Page Page Drum Kit List Drum Kit List About Digital Effects (Reverb/Chorus/DSP) About Digital Effects (Reverb/Chorus/DSP) ■When DSP type Is Selected as a Insertion Effect The Digital Effect List Troubleshooting MIDI Data Format (3) TRANSMIT/RECEIVE DATA MIDI Data Format Page Page < Table 1-1>Parmeter Basic Address Table > MIDI Parameter table (System information) < Table 1-4> MIDI Parameter Change table (EFFECT 1) < Table 1-5> MIDI Parameter Change table (MULTI PART) Page < Table 1-6> MIDI Parameter Change table (DRUM SETUP) < Table 1-7> Effect Type List < Table 1-8> Effect Parameter List Page Page MIDI Implementation Chart MIDI Implementation Chart Specifications Index 90 DAYS LABOR 1 YEAR PARTS CONSUMERS RESPONSIBILITIES EXCLUSIONS NORTH AMERICA CENTRAL & SOUTH AMERICA EUROPE AFRICA MIDDLE EAST