Drive chain slack: 30.0 mm (1.18 in)
4
|
| 1 | 2 | 3 |
|
|
| ||
| 1. | Hub stopper bolt |
| |
| 2. | Locknut |
| |
1 | 3. | Axle holding bolt (lower) |
| |
| 4. | Axle holding bolt (upper) |
| |
8
1.Drive chain slack
3.If the drive chain slack is incorrect, adjust it as follows.
To adjust the drive chain slack
1.Loosen the hub stopper bolt locknut and then the hub stopper bolt.
2.Loosen the axle holding bolts.
3.Loosen the chain adjusting bolt locknut. To tighten the drive chain, turn the adjusting bolt in direction (a). To loosen the drive chain, turn the adjusting bolt in direction (b), and then push the wheels forward.