Tightening torque: Screw:
16 Nm (1.6 m·kgf, 11.6 ft·lbf) Oil filler bolt:
23 Nm (2.3 m·kgf, 16.6 ft·lbf)
To change the transmission oil
1.Place the ATV on a level surface.
2.Start the engine, warm it up for several min- utes, and then turn it off.
3.Place an oil pan under the transmission to col- lect the used oil.
4.Remove the oil filler bolt and the drain bolt to
8drain the oil from the transmission case.
1 
1.Transmission oil drain bolt
5.Install the drain bolt, and then tighten it to the specified torque.
Tightening torque: Transmission oil drain bolt:
23 Nm (2.3 m·kgf,16.6 ft·lbf)
6.Add the specified amount of the recommend- ed transmission oil, and then install and tight- en the oil filler bolt.