periodic maintenance and lubrication chart.
To check the transmission oil level
1.Place the ATV on a level surface.
2.Start the engine, warm it up for several min- utes, and then turn it off.
3.Wait a few minutes until the oil settles, and then remove the screw located at the right side of the crankcase.
2
3
1
1.Screw
2.Transmission oil level check window
3.Correct oil level
4.Check the transmission oil level.
1
1. Transmission oil filler bolt
NOTE: |
|
|
| |
|
| |||
The transmission oil should be at the brim of the | 8 | |||
hole. | ||||
| ||||
| ||||
5.If the transmission oil level is below the brim of the hole, remove the oil filler bolt, add suffi- cient oil of the recommended type to raise it to the correct level, and then install and tighten the screw and the oil filler bolt.