1
2
1.Maximum level mark
2.Minimum level mark
NOTE:
The engine oil should be between the minimum and maximum level marks.
6.If the engine oil is at or below the minimum level mark, add sufficient oil of the recom- mended type to raise it to the correct level.
7.Insert the dipstick into the oil filler hole, and then tighten the engine oil filler cap.
To change the engine oil
1.Place the ATV on a level surface.
2.Start the engine, warm it up for several min-
utes, and then turn it off.
3.Place an oil pan under the engine to collect the used oil.
4.Remove the engine oil filler cap, and then re- move the engine oil drain bolt to drain the oil from the crankcase.
1 
4
3 | 2 | 1 | 8 |
|
|
1.Engine oil drain bolt
2.
3.Spring
4.Oil strainer
ECB00310
CAUTION:
When removing the engine oil drain bolt, the compression spring, oil strainer and