fore cleaning the spark arrester. | 3 | 1 |
1. Remove the screws. |
42
1
1. Screw
8
2. Remove the tailpipe by pulling it out of the muffler.
3. Tap the tailpipe lightly, and then use a wire brush to remove any carbon deposits from the spark arrester portion of the tailpipe and inside of the tailpipe housing.
1.Screw
2.Gasket
3.Tailpipe
4.Spark arrester
4.Insert the tailpipe into the muffler and align the screw holes.
5.Install the screws and tighten them.
EWB01910
WARNING
POTENTIAL HAZARD
Improper cleaning of the spark arrester. Hot exhaust system.