INSTALLING THIS UNIT IN YOUR LISTENING ROOM

 

Using a metal wall bracket

Using a rack

You can use the optional metal wall bracket to mount this system on your listening room wall.

For details on how to attach the metal bracket to the wall or how to attach this system to the metal bracket, refer to the instructions supplied with the bracket.

Metal wall bracket

YSP-1

TV

Using a stand

You can mount your TV on the stand placed on a commercially available rack to install this unit under your TV.

For details on how to attach the stand or how to attach this system to your TV, refer to the instructions supplied with the stand.

Stand

TV

YSP-1

You can install this system either above or under your TV in a commercially available rack.

Before installing, make sure that the rack is large enough to allow adequate ventilation space around this unit, and that it is strong enough to support the weight of both this unit and your TV.

When the YSP-1 is

installed above your TV

TV

When the YSP-1 is

installed under your TV

Affixing this unit

To affix this unit, remove the protection pads from the bottom of the unit, then secure the supplied fasteners (4 pieces) to the bottom four corners of this unit and the top of the rack, etc. as shown below.

Notes

•Do not install this unit on top of a slanted surface. This unit may fall over and cause injury.

•Make sure you wipe the surface of the rack, etc. before securing the fasteners. Appling the tape to a dirty or wet surface will weaken the sticking power of the tape, and this unit may fall as a result.

YSP-1

Remove the protection pads

Peel off the film

Fasteners

10