PLAYBACK
Selecting an input source
You can playback sound and/or images from the various components connected to this unit simply by pressing one of the input selector buttons (TV, DVD, VCR or AUX) on the remote control.
TV MUTE
TV INPUT | TV | DVD |
SLEEP AUX VCR
To playback a TV program
Press TV.
TV
VOL
To playback a DVD
Press DVD.
DVD
VOL
To playback a video tape
Press VCR.
VCR
VOL
Playing back sources
This section uses a DVD player as the playback component (source).
y
For details on the TV and DVD player you are using, refer to the owner’s manual supplied with your TV and DVD player.
1Turn on the power to your DVD player using the supplied remote control.
2Switch the video input on your TV using the supplied remote control until the screen for your DVD player is displayed.
3If necessary, turn down the volume of your TV until you cannot hear any sound.
4Press DVD on the remote control.
The playback source for this unit switches to DVD.
DVD
5Playback the DVD on your DVD player using the supplied remote control.
Audio signals from your DVD player are output from this unit’s speakers.
y
•If the output volume is too low, increase the volume on this unit to around
•If you have set remote control codes for your TV and DVD player, you can use this unit’s remote control to operate these components. For details on how to set remote control codes, see page 51.
OPERATION | BASIC |
|
|
To playback a component connected to the AUX jack
Press AUX.
AUX
VOL
31