TROUBLESHOOTING
■Remote controlProblem | Cause | Remedy | Refer to | |
page | ||||
|
|
| ||
|
|
|
| |
The remote control | Wrong distance or angle. | The remote control will function within a maximum | ||
does not work and/or |
| range of 6 m (20 ft) and no more than 30 degrees off- |
| |
function properly. |
| axis from the front panel. |
| |
|
|
|
| |
| Direct sunlight or lighting (from an | Reposition this unit. | — | |
| inverter type of fluorescent lamp, etc.) is |
|
| |
| striking the remote control sensor of this |
|
| |
| unit. |
|
| |
|
|
|
| |
| The batteries are weak. | Replace all batteries. | ||
|
|
|
| |
You cannot operate | The external component you want to | Press INPUT or the input selector buttons to select | ||
external components | operate is not selected as the input source. | the external component you want to operate. |
| |
with this unit’s remote |
|
|
| |
The remote control code was not correctly | Set the remote control code correctly or try another | 51 | ||
control. | ||||
| set. | code for the same manufacturer using the “LIST OF |
| |
|
| REMOTE CONTROL CODES” at the end of this |
| |
|
| manual. |
| |
|
|
|
| |
| Even if the remote control code is | Use the remote control supplied with the external | — | |
| correctly set, there are some models that | component. |
| |
| do not respond to the remote control. |
|
| |
|
|
|
| |
The cursor buttons do | You pressed an input selector button. | Press TEST once. | ||
not work during SET |
|
|
| |
MENU operation. |
|
|
| |
|
|
|
|
56