MANUAL SETUP
To achieve the best quality surround sound, you can use MANUAL SETUP to
y
Most of the parameters described in SOUND MENU are set automatically when you perform EASY SETUP (see page 24). Use SOUND MENU to make additional adjustments.
SOUND MENUItem | Features | Page |
|
|
|
SUBWOOFER SET | Customizes the various subwoofer settings. | 38 |
|
|
|
SPEAKER LEVEL | Adjusts the output level of each speaker. | 38 |
|
|
|
DYNAMIC RANGE | Adjusts the dynamic range for Dolby Digital or DTS signals. | 39 |
|
|
|
AUDIO SET | Customizes the muting level and audio delay. | 39 |
|
|
|
TONE CONTROL | Adjusts the output level of | 39 |
|
|
|
Use to manually adjust listening room parameters or alter the quality and tone of the sound output by this unit.
Item | Features | Page |
|
|
|
PARAMETER | Customizes listening room and listening position settings. | 40 |
|
|
|
BEAM ADJ | Adjusts the various beam settings. | 41 |
|
|
|
ROOM EQ | Adjusts the tonal quality of the listening room. | 42 |
|
|
|
BEAM TONE | Adjusts the output level of | 42 |
|
|
|
IMAGE LOCATION | Adjusts the position of the front left and right speakers. | 43 |
|
|
|
MEMORY | Saves and calls up setting contents. | 43 |
|
|
|
Use to reassign digital input/outputs and select the input mode.
Item | Features | Page |
|
|
|
INPUT ASSIGNMENT | Assigns jacks according to the component to be used. | 44 |
|
|
|
INPUT MODE | Selects the initial input of the source. | 44 |
|
|
|
INPUT RENAME | Renames the displayed input source. | 44 |
|
|
|
Use to adjust the optional system parameters.
Item | Features | Page |
|
|
|
DISPLAY SET | Adjusts the brightness of the display and OSD. | 45 |
|
|
|
UNIT SET | Changes the display unit of measurement. | 46 |
|
|
|
y
BEAM MENU allows you to make surround sound effects settings normally available in the speaker settings menu.
36