You can adjust the direction from which front left and right speaker sound is heard by directing these audio signals so that they are also output from the center speaker.
Use this feature to redirect audio signals if the sound coming from the left and right speakers seems unnatural, such as when your listening position is not the center of your listening room.
You can only adjust this parameter when 3 beam mode or 5 beam mode is selected.
Choices: ON, OFF
Setting range: 0% to 95%
Initial setting: 0%
MANUAL SETUP
■MEMORY (User memory)Saves and loads setting contents for SET MENU.
For example, if there are curtains in the path of beams, the effectiveness of the beams will vary depending on whether the curtains are open or closed.
In this case, it is handy to save settings according to the conditions of your listening room.
Choices: USER1, USER2, USER3
F)MEMORY 1/2SAVE SELECT
)USER1 USER2 USER3
[p]/[p]:to Save [<]/[>]:Select [SELECT]:Enter
. )OFF ON
LEFT;;;;;;;;;;0%
RIGHT;;;;;;;;;0%
[]/[]:Up/Down [<]/[>]:Select
LEFT (Left)
Adjusts audio signals towards the left.
The higher the percentage, the louder the output from the center.
RIGHT (Right)
Adjusts audio signals towards the right.
The higher the percentage, the louder the output from the center.
Without adjustment |
| With the front right | ||||
|
| speaker adjusted | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SAVE (Save)
Saves settings in this unit’s memory. (The listening environments set as the factory default settings will be erased.)
LOAD (Load)
Loads memory settings. Initially, three listening environments are set as the factory default settings. For details, see page 57.
When the curtains are | When the curtains are | ||||||
open | closed | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OPERATION | ADVANCED |
|
|
43