■DYNAMIC RANGE (Dynamic range)

Use to select the amount of dynamic range compression to be applied to the speakers. This setting is effective only when the unit is decoding Dolby Digital and DTS signals. Dynamic range is the difference between the smallest sound that can be heard above the noise of the equipment and the biggest sound that can be heard without distortion. Choices: MIN (minimum), STD (standard),

MAX (maximum)

C)DYNAMIC RANGE

MIN STD )MAX



[<]/[>]:Select

[SELECT]:Retern

Select to adjust the speaker compression.

•Select MIN for listening to sources at low volume levels.

•Select STD for general use.

•Select MAX for feature films.

■AUDIO SET (Audio set)

Use to customize this units overall audio settings.

D)AUDIO SET

.MUTE LEVEL;;;MUTE

AUDIODELAY;;;0ms

[]/[]:Up/Down

[<]/[>]:Select

MUTE LEVEL (Muting level)

Use to adjust how much the mute function reduces the output volume.

Choices: MUTE, –20 dB

•Select MUTE to completely halt all output of sound.

•Select –20 dB to reduce the current volume by 20 dB.

AUDIO DELAY (Audio delay)

Use to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors.

Choices: 0 to 160 ms

MANUAL SETUP

■TONE CONTROL (Tone control)

You can adjust the tonal quality of your speakers.

E)TONE CONTROL



.TREBLE - +

;;;;;0dB

BASS

;;;;;0dB

[]/[]:Up/Down

[<]/[>]:Select

TREBLE (Treble)

Use to adjust the high frequency response.

Choices: –12 dB to +12 dB

Initial setting: 0 dB

BASS (Bass)

Use to adjust the low frequency response.

Choices: –12 dB to +12 dB

Initial setting: 0 dB

OPERATION

ADVANCED

 

 

39