3Press / to select the character you want.

•You can use up to 8 characters for each input.

•Press to change the character in the following order, or press to go in the reverse order:

A to Z, a space, 0 to 9, a space, a to z, a space, #, *, +, etc.

MANUAL SETUP

OPTION MENU

You can use this menu to adjust the optional system parameter, such as OSD settings and the display unit of measurement.

(SET MENU → MANUAL SETUP →

OPTION MENU)

4Repeat steps 1 and 2 to rename each input.

5To exit, press SELECT when finished.

The new name(s) are registered, and the display returns to the previous screen.

SELECT

4 OPTION MENU

.A)DISPLAY SET

B)UNIT SET





[]/[]:Up/Down

[SELECT]:Enter

■DISPLAY SET (Display settings)

Use to adjust the brightness of the front panel display.

A)DISPLAYSET 1/2

.STANDARD DIMMER

;;;;;;;;;;OFF

AUTO DIMMER

;;;;;;;;;;OFF

[]/[]:Up/Down

[<]/[>]:Select

STANDARD DIMMER (Standard dimmer)

Use to adjust the brightness of the front panel display when this unit is operated via the front panel or remote control.

Choices: –2, –1, OFF

AUTO DIMMER (Auto dimmer)

If no operation is performed for a specified period, the front panel display dims. Use to adjust the brightness of the front panel display in this case.

Choices: DISPLAY OFF, –3 to –1 (based on the STANDARD DIMMER setting), OFF

OSD SHIFT (OSD shift)

Use to adjust the vertical position of the OSD. Adjust in the – (minus) direction to raise the position of the OSD, and adjust in the + (plus) direction to lower it.

Choices: –5 to +5

Initial setting: 0

OSD BACK COLOR (OSD background color)

Use to select the background color of the OSD. Choices: BLUE, GRAY

OPERATION

ADVANCED

 

 

45