PLAYBACK FEATURES

Playback

INTRODUCTION

Playing back sources

This section describes how to playback source input from your external components. For details on your external components, refer to the owner’s manual supplied with each component.

1Press CPower (p) key to turn on this unit.

2Turn on external components (TV, Blu-ray disc player, etc.) connected to this unit.

3Press one of the DInput selector keys to select an external component as an input source.

Input source name

HDMI1

y

•You can change the input source name displayed on the front panel display (page 38).

4Start playback of the external component that you have selected as the input source, or select a radio station on the tuner.

•FM tuning (page 25)

•Playing back iPod/iPhone (page 30)

5Press KVOLUME +/– to adjust the volume.

Volume

Volume 40
6Press CPower (p) key to turn this unit to the standby mode.
Playing back TV sounds
1Select the desired TV channel.2Press DTV to select the TV as the input source.3Mute the sound output on the TV.
Playing back a player
1Select the player as the video input on the TV.2Press DHDMI1-4 or DAUX1/2 to select the player as the input source.

For example, if the player is connected to the HDMI IN 1 jack of this unit, press DHDMI1.

3Start playback of the player.4Mute the sound output on the TV.

y

•If your player supports the HD audio, check whether the audio output setting on the player is set to the value which supports HD audio output (“Auto”, “Bitstream”, etc.).

•If your player does not support the HD audio, check whether the audio output setting on the player is set to multi-channel linear PCM.

•If your player is connected to this unit through the digital connection, check whether the audio output setting on the player is set to digital output (“Bitstream”, “Dolby Digital”, “DTS”, etc.).

•To enhance the surround sound effect, set the audio setting of your player to the multi-channel audio mode.

•You can use the supplied demonstration DVD to check the digital signals being input from the player through the digital

connection (HDMI, optical or coaxial). TheDIGITAL indicator lights up when this unit detects the digital audio signal

input.

Muting audio output
1Press KMUTE to mute the audio output.2Press KMUTE again to resume audio output.
Decoder and input channel indicators
■Decoder indicators

Depending on the input source and the selected decoder, the indicators in the front panel display light up as follows:

Changing OSD

language

AUTO SETUP (IntelliBeam)

Using the system

memory

PlaybackPlayback modeFM tuningSIRIUS Satellite Radio™ tuningPlaying back iPod™Useful features

PREPARATION

FEATURES PLAYBACK

SETTINGS

APPENDIX

21 En