General operation flow
1Install this unit and connect to other components.
“Installation” (page 10), “Connections” (page 12)
2Run AUTO SETUP to optimize the beam and sound settings.
“AUTO SETUP (IntelliBeam)” (page 15)
3Play back a source.
“Playback” (page 21).
4Change the playback method (surround/stereo), CINEMA DSP and/or beam modes settings.
“Playback mode” (page 22).
5Configure this unit's settings and/or set remote control codes.
“Customizing this unit (SET MENU)” (page 33), “Controlling external components” (page 42).
PREPARATION INTRODUCTION
FEATURES PLAYBACK
SETTINGS
APPENDIX