Status message

Cause

Remedy

See

page

 

 

 

 

 

 

 

ACQUIRING

The signal is too weak.

Adjust the orientation of the antenna of the

—

 

 

SiriusConnect tuner. Use the “Antenna Level”

 

 

 

information on the front panel display to check the

 

 

 

antenna reception level.

 

 

 

 

 

UPDATE

The SiriusConnect tuner is updating the channel list.

Wait until the updating is complete.

—

 

 

 

 

 

The period of the subscription is end.

Contact SIRIUS Satellite Radio to renew the

27

 

 

subscription.

 

 

 

 

 

FW UPDATING

The SiriusConnect tuner is updating the firmware.

Wait until the updating is complete.

—

 

 

 

 

SUB UPDATED

The subscription information is updated.

—

—

 

 

 

 

■ Remote control

 

 

 

 

 

 

 

Problem

Cause

Remedy

See

page

 

 

 

 

 

 

 

The remote control does not work

Wrong distance or angle.

The remote control functions within a maximum

14

and/or function properly.

 

range of 6 m (20 ft) and no more than 30 degrees off-

 

 

 

axis from the front panel.

 

 

 

 

 

 

Direct sunlight or lighting (from an inverter type of

Reposition this unit.

—

 

fluorescent lamp, etc.) is striking the remote control

 

 

 

sensor of this unit.

 

 

 

 

 

 

 

The batteries are weak.

Replace all batteries.

14

 

 

 

 

Cannot operate external

The external component you want to operate is not

Press the desired DInput selector key to select the

42

components with the remote

selected as the input source.

external component you want to operate.

 

control of this unit.

 

 

 

The remote control code was not correctly set.

Set the remote control code correctly or try another

42

 

 

 

code for the same manufacturer using the “List of

 

 

 

remote control codes”.

 

 

 

 

 

 

Even if the remote control code is correctly set, there

Use the remote control supplied with the external

—

 

are some models that do not respond to the remote

component.

 

 

control.

 

 

 

 

 

 

■ iPod

Problem

Cause

Remedy

See

page

 

 

 

 

 

 

 

No sound.

PDX-50TX is connected to another device.

Select the same group ID as selected on this unit.

—

 

 

 

 

 

PDX-50TX and this unit are not connected since they

Set both PDX-50TX and this unit to the same group.

39

 

are set to different groups.

 

 

 

 

 

 

 

“Wireless Function” is set to “No”.

Set “Wireless Function” to “Yes”.

39

 

 

 

 

 

Distance is too far.

Move PDX-50TX closer to this unit.

—

 

 

 

 

 

There is a device (microwave oven, wireless LAN,

Move this unit away from the device. If the device is

—

 

etc.) outputting signals in 2.4 GHz frequency band

IEEE802.11n-compliant, change the channel setting

 

 

nearby.

of the device so as not to affect the unit.

 

 

 

 

 

 

The iPod or iPhone is not connected to PDX-50TX

Connect the iPod or iPhone firmly.

—

 

firmly.

 

 

 

 

 

 

 

The firmware of the iPod or iPhone is not updated.

Download the latest iTunes software to update the

—

 

 

firmware of the iPod or iPhone.

 

 

 

 

 

 

The signal from PDX-50TX is blocked by your body

Change the way of holding, orientation, or position of

—

 

or metallic objects, etc.

PDX-50TX to avoid the object blocking the signal.

 

 

 

 

 

 

The battery of iPod or iPhone is low.

Charge the iPod or iPhone.

—

 

 

 

 

 

The iPod or iPhone is in the process of connecting

Please wait for a while.

—

 

with this unit.

 

 

 

 

 

 

 

The protection circuitry has been activated by

Turn down the volume.

21

 

excessive volume.

 

 

 

 

 

 

Controlling volume on the iPod or

The iPod or iPhone being used is not supported by

Use an iPod or iPhone supported by this unit.

30

iPhone does not work.

this unit.

 

 

 

 

 

 

 

The iPod or iPhone is not connected to PDX-50TX

Connect the iPod or iPhone firmly.

—

 

firmly.

 

 

 

 

 

 

PREPARATION INTRODUCTION

FEATURES PLAYBACK

SETTINGS

APPENDIX

45 En