INSTALLATION INSTRUCTIONS
INSTALLATION
8
AR0360
4.8Place the log retainer in the two guides as shown in Diagram 9.
9
AR2076
FOR CLARITY, THE FOLLOWING LOG ARRANGEMENT DIAGRAMS DO NOT INCLUDE ILLUSTRATION OF THE RETAINER.
4.9Locate the front coal between the heat shield and the flame baffle so that the ends sit flat against the burner skin (see Diagram 10).
10
AR0361
4.10Place five of the loose round coals on the front coal so that they lean against the flame baffle, in between the fingers. Place the two rectangular coals against the reflector panels, one either side, behind the front row of loose coals (see Diagram 11).
11
AR0362
4.11Place four of the loose round coals behind the first row so that they sit on the fingers, the two outer coals should touch the rectangular coals (see Diagram 12).
12
AR0363
4.12Place the remaining three coals behind the centre row so that they touch the back panel (see Diagram 13).
13
AR0364
4.13Replace the glass frame using the 6 x frame fixing screws (see Diagram 6) and close door.
5.Lighting THE STOVE
5.1For full instructions see User Instructions, Section 2.
13
