USER INSTRUCTIONS
11
AR0364
6.8Replace the glass frame using the 6 x frame fixing screws (see Diagram 4) and close door.
7. Gazco flue sure system
The stove is fitted with the Gazco Flue Sure System, which will act to cut off the gas supply to the burners in the event of incorrect operation of the flue. If the system acts to cut off the gas supply, this indicates that there is insufficient flue pull. If this occurs a minimum of 10 minutes should be allowed before trying to relight. Continued operation of this safety device means there may be a serious problem with the flue system. A qualified gas engineer should inspect this.
Do not use the stove until an engineer says it is safe to do so.
8. flame failure device
This is a safety feature of all Gazco stoves which automatically switches off the gas supply should the pilot go out.
9. Running in
The surface coating of your Gazco stove burns off during the first few hours of use, producing a harmless temporary odour. This disappears after a short period, but if it persists, ask your retailer for advice.
10. Servicing
A qualified gas engineer must service the stove every 12 months. In all correspondence, always quote the Model and Serial Number found on the data badge at the back of the stove.
11. Ventilation
Any purpose provided ventilation should be checked periodically to ensure that it is free from obstruction.
12. INSTALLATION DETAILS
Make sure your installer completes the Appliance Commissioning Checklist on page 3. This records essential details of this stove. In all correspondence, always quote the Model and Serial Number.
13. HOT SURFACES
This stove becomes hot during normal use. You must use a suitable fire guard to protect children, the elderly and the infirm.
8
