![](/images/new-backgrounds/1010023/1002313x1.webp)
USER INSTRUCTIONSHEADING
6.Fuel bed arrangement
6.1Place the flame baffle onto the burner and push against the rear tray lip (see Diagram 5).
5 | Spacer brackets |
AR0359
6.2Locate the rear panel against the spacer brackets
(see Diagram 3) and slide down so that it locates on the ledge of the flame baffle (see Diagram 6).
6
AR0360
6.3Place the log retainer in the two guides as shown in Diagram 7.
7
AR2076
FOR CLARITY, THE FOLLOWING LOG ARRANGEMENT DIAGRAMS DO NOT INCLUDE ILLUSTRATION OF THE RETAINER.
6.4Locate the front coal between the heat shield and the flame baffle so that the ends sit flat against the burner skin
(see Diagram 8).
8
Heat shield | AR0361 |
6.5Place five of the loose round coals on the front coal so they lean against the flame baffle, in between the fingers. Place the two rectangular coals against the reflector panels, one either side, behind the front row of loose coals
(see Diagram 9).
9
AR0362
6.6Place four of the loose round coals behind the first row so that they sit on the fingers of the flame baffle, the two outer ones should touch the rectangular coals (see Diagram 10).
10
AR0363
6.7Place the remaining three round coals behind the centre row so that they touch the back panel (see Diagram 11).
7