SERVICING
REPLACING THE HEATER ASSEMBLY
1.28To access the heater assembly remove any loose top plates or panels before moving the stove and carefully lay the stove on its back.
1.29Remove the 5 x screws securing the heater casing to the bottom of the firebox (see Diagram 10).
10
Screws
Bottom of Firebox | Heater Assembly Case |
|
AR2397 |
1.30Remove the 4 x screws from the front of the heater casing (see Diagram 11) to free the heater assembly.
11
ScrewsAR2397
1.31Tilt the heater casing forward and carefully remove the heater assembly (see Diagram 12).
12
AR2398
1.32Disconnect the 4 x coloured wires running from the firebox to the heater assembly (see Diagram 13) noting their orienta- tion.
13
Disconnect wires
Disconnect wires | AR2399 |
1.33Fit new heater assembly, ensuring all wires are correctly attached and the heater is secured to its casing using 4 x screws.
1.34Reattach heater casing to bottom of firebox using 5 x screws.
1.35Relocate the stove to its original position and replace any loose top plates or panels.
12
