USER INSTRUCTIONS
2. Operating instructions
WARNING! Do not operate the appliance if it is damaged or has malfunctioned. If you suspect the appliance is damaged or has malfunctioned call a qualified service engineer to inspect the appliance, and replace any part of the electrical system if necessary, before reuse.
GENERAL
2.1The appliance can be operated by the infrared handset or the manual controls on the bottom right hand side of the stove.
PREPARATION BEFORE USE Batteries:
2.2Ensure that the handset battery is new and is inserted correctly.
2.3Dispose of any worn out batteries safely at your recycling centre on replacement.
When using the handset:
2.4Ensure the handset is pointed at the infrared sensor located behind the flame effect screen at the back of the inside of the appliance.
LOCATION OF POWER SWITCH
2.5The mains power switch is located on the control panel on the lower
2.6Switch ON
2.7A beep is heard to indicate the fire is ready for use.
REMOTE AND MANUAL OPERATION
2.8The following functions can be controlled using the manual controls or remote handset:
2.9The Standby function and the thermostat can only be operated via the manual controls.
2.10The effects can be turned off using the remote, returning the appliance to Standby.
1
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
Flame effect button | Thermostat |
|
| ||||
Standby | |||||||
|
| ||||||
|
|
|
|
| On/Off Switch | ||
|
|
| Heat setting button |
| AR2389 | ||
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
2 |
|
|
|
| On/Off button | ||
Flame effect |
|
|
|
|
| ||
|
|
|
|
|
Heat setting 1kW
Heat setting 2kW
AR2390
Standby ON/OFF:
2.11The appliance is in Standby mode when the power is switched on via the manual control panel. You must have this power supply ON
Turning On the Appliance Flame Effects:
2.12The flame effect button on both the manual and remote controls has 4 settings:
4