York 00497VIP manual Operation, Optiview Remote Control Center

Operation

SECTION 3 – OPERATION

OPTIVIEW REMOTE CONTROL CENTER

FIG. 7

The OptiView Remote Control Center display is highlighted by a full screen graphics display. This display is nested within a standard keypad, and is surrounded by “soft” keys which are redefined based on the currently displayed screen. Eight buttons are available on the right side of the panel, and are primarily used for navigation between the system screens. At the base of the display are 5 additional buttons. The area to the right of the keypad is used for data entry with a standard numeric keypad provided for entry of system setpoints and limits.

The Decimal key is used prior to entering decimal values.

A +/- key has also been provided to allow entry of negative values and AM/PM selection during time entry.

00500VIP

In order to accept changes made to the chiller setpoints, the Check key is provided as a universal ‘Enter’ key or ‘Accept’’ symbol.

In order to reject entry of a setpoint or dismiss an entry form, the ‘X’ key is provided as a universal ‘Cancel’ symbol.

Cursor Arrow keys are pro- vided to allow movement on screens which contain a large amount of entry data. In addi- tion, these keys can be used to scroll through history and event logs.

18 YORK INTERNATIONAL