Service

KEYPAD TEST

FIG. 49

This diagnostic is used to verify Keypad operation and the Microboard’s ability to respond to a pressed key. Refer to description of Keypad operation in Section 5 of this book.

Procedure

1.Press each keypad key. As the key is pressed, an illuminated LED is displayed corresponding to the key location on the keypad.

2.Press the DIAGNOSTICS key to return to the MAIN DIAGNOSTICS Screen.

Troubleshooting

If an LED is not displayed when a key is pressed, the Keypad, Keypad ribbon cable or Microboard could be defective. Use the following procedure to locate the defective component.

1.Keypad

a.Disconnect the ribbon cable from the Keypad.

b.Identify row/column coordinate of the key to be tested. Refer to Figure 46.

00568VIPC

c. In the Keypad connector, locate the pins of the row/column coordinate of the key of the key to be tested.

d. Insert the leads of an Ohmmeter into the pins identified in step “c” above.

e. Press the key to be tested. If the contact resistance is >100 Ohms, the Keypad is defec- tive.

f. Release the key. If the contact resistance is < 1 Meg Ohm, the Keypad is defective.

2.Ribbon Cable

Using an Ohmmeter, perform a continuity test on all conductors in the ribbon cable. An open circuit would indicate the ribbon Cable is defective.

3.Microboard

There are no checks or measurements to be made on the Microboard. If the Keypad and Ribbon Cable check OK per the above procedures, the Microboard is most likely the cause of the problem.

98

YORK INTERNATIONAL

Page 98
Image 98
York 00497VIP manual Keypad Test

00497VIP specifications

York 00497VIP is an innovative system designed to enhance efficiency and comfort in residential and light commercial environments. Central to its appeal is its commitment to energy efficiency and environmentally friendly operation, making it a popular choice for those looking to reduce their carbon footprint.

One of the standout features of the York 00497VIP is its advanced variable speed compressor technology. This technology allows the system to adjust its cooling and heating output based on real-time demand, leading to significant energy savings. Unlike traditional systems that often operate at a single speed, the variable speed compressor modulates its output to maintain a consistent indoor climate, ensuring optimal comfort while minimizing energy consumption.

The system is equipped with a high-efficiency air handler that enhances airflow, ensuring that every corner of the space benefits from consistent temperature control. Its unique design facilitates quiet operation, making it ideal for residential spaces where noise levels need to be kept to a minimum. This whisper-quiet functioning doesn’t compromise power, as the air handler is designed to work collaboratively with the compressor to deliver efficient cooling or heating throughout the home.

York has integrated smart technology into the 00497VIP, allowing homeowners to control the system remotely via smartphone applications. This feature not only adds convenience but also enables users to monitor energy usage and adjust settings from anywhere, enhancing the possibility of energy savings.

The system also boasts advanced filtration capabilities, utilizing a multi-stage filtration system to capture dust, allergens, and other airborne particles. This technology improves indoor air quality, promoting a healthier living environment.

In terms of adaptability, the York 00497VIP is compatible with a range of smart home systems, seamlessly integrating into existing setups. This flexibility extends to its installation, as it can be tailored to fit various spaces without significant modifications to the existing infrastructure.

Built to withstand diverse environmental conditions, the York 00497VIP is constructed with durable materials, ensuring longevity and reliable performance. This combination of efficiency, smart features, and adaptability makes it an ideal choice for consumers seeking a sustainable and effective heating and cooling solution for their home or light commercial space.