York DH 240 Rear View Dimensions, Dimensions listed are for side, duct flange openings see

40-3/8"
		SUPPLY
		AIR
			RETURN
			AIR
COMPRESSOR			OUTDOOR
ACCESS
			AIR
SUPPLY AIR		18-5/8"
ACCESS
Dimensions listed are for side			27-3/4"
	RETURN AIR	5-1/8"
duct flange openings; see
	ACCESS
Field Accessories for Side	REAR		28-5/8” (15 TON)
Duct Flange Kit.			39-5/8"
			(17.5 thru 25 TON)
	VIEW

262260-YTG-E-1008

EVAPORATOR

SECTION

DOT PLUG (For pressure drop reading)

FILTER

ACCESS

40-1/2"

1" NPT FEMALE COND. DRAIN CONNECTION

OUTDOOR AIR

COMPARTMENT

ACCESS

FIGURE 5 - REAR VIEW DIMENSIONS

NOTE:Units are shipped with the bottom duct openings covered. An accessory flange kit is available for connecting side ducts.

For bottom duct applications:

1.Remove the side panels from the supply and return air compartments to gain access to the bottom supply and return air duct covers.

2.Remove and discard the bottom duct covers. Duct openings are closed with sheet metal covers except when the unit includes a power exhaust option. The covering consists of a heavy black paper composition.

3.Replace the side supply and return air compartment panels.

For side duct applications:

1.Replace the side panels on the supply and return air compartments with the side duct flange accessory kit panels.

2.Connect ductwork to the flanges on those panels.

Johnson Controls Unitary Products 35