York DH 180, DH 210, DH 300 Indoor Sound Power RATING1, Capacity Ratings ARI, GAS Heat RATINGS1

262260-YTG-E-1008

TABLE 1: INDOOR SOUND POWER RATING1

		ESP	BLOWER							SOUND POWER (db 10-12Watts)
UNIT
	CFM						Octave Band Centerline Frequency (Hz)								SWL	dB(A)
SIZE
																@
		IWG	RPM	BHP	63	125		250	500		1,000	2,000	4,000	8,000	dB(A)
																10Ft.2
180	6,000	1.00	1,080	4.60	99	99		89	82		84	77	72	67	89	56
210, 240	8,000	1.00	1,120	6.65	102	102		92	85		87	80	75	70	92	59
300	10,000	1.30	1,160	12.5	108	108		98	91		93	86	81	76	98	65

1.These values have been accessed using a model of sound propagation from a point source into the hemispheric\free field. The dBA val- ues provided are to be used for reference only. Calculation of dBA values cover matters of system design and the fan manufacture has no way of knowing the details of each system. This constitutes and expectation to any specification or guarantee requiring a dBA value or sound data in any other form than sound power level ratings.

2.At a distance of 10 feet from the blower.

TABLE 2: CAPACITY RATINGS - (ARI 360)1

MODEL		MBH	EER2	IPLV3
	COOLING ONLY
DH180C00		1784	10.8	11.3
DH210C00		205	10.2	10.8
DH240C00		223	9.7	10.2
DH300C00		271	9.6	9.6
	COOLING WITH GAS HEAT
DH180N/S		1784	10.8	11.3
DH210N/S		205	10.2	10.8
DH240N/S		223	9.7	10.2
DH300N/S		271	9.6	9.6
COOLING WITH ELECTRIC HEAT
DH180E18		1784	10.8	11.3
DH180E36		1784	10.8	11.3
DH180E54		1764	10.5	11.0
DH180E72		1764	10.5	11.0
DH210E18		205	10.2	10.8
DH210E36		205	10.2	10.8
DH210E54		203	10.0	10.6
DH210E72		203	10.0	10.6
DH240E18		223	9.6	10.1
DH240E36		223	9.6	10.1
DH240E54		221	9.5	9.7
DH240E72		219	9.5	9.7
DH300E18		271	9.6	9.6
DH300E36		271	9.6	9.6
DH300E54		269	9.5	9.4
DH300E72		269	9.5	9.4

1.80/67°F Indoor and 95°F outdoor.

2.EER = Energy Efficiency Ratio at full load - the cooling capacity in Btu’s per hour (Btuh) divided by the power input in watts, expressed in Btuh per watt (Btuh/watt).

3.IPLV = Integrated part load value.

4.Deduct 2 MBH @ 208V.

TABLE 3: GAS HEAT RATINGS1

MODEL	MBH INPUT	MBH OUTPUT
DH180N/S24	300	240
DH180N/S32	400	320
DH210N/S24	300	240
DH210N/S32	400	320
DH240N/S24	300	240
DH240N/S32	400	320
DH300N/S24	300	240
DH300N/S32	400	320

1.All units are two-stage heating. First stage is 50% of total. SSE = Steady State Efficiency (80%) - Output divided by Input

For units with VFD and electric or gas heat, the speed of the indoor blower motor continues to be controlled by duct static pressure via the VAV con- trol board.

If there are VAV boxes present in the duct system, the boxes must be driven to the full-open position using a customer-supplied power source to assure adequate airflow across electric heating elements or gas heat exchanger tubes.

Johnson Controls Unitary Products 9