![](/images/new-backgrounds/1222906/22290635x1.webp)
If you fail to obtain IP address for the
Wireless Parameters
Opening“Radio Settings can lead you to the
Figure 10 ZMAX-8210 Wireless Parameters
Base Station ID:This field allows you to enter the Base Station ID you want to connect, to establish a tie between this CPE and the Base Station.
Duplex Mode:This field allows you to have the options of TDD and HFDD modes.
Note:
Under the Duplex Mode, you are required to keep the consistency in setting between the
Center Frequency:This field helps you to scan the center frequency that the linked device performs and shows the frequency in this field.
CP Size:This field displays the ratio of hardware MTU (maximum transmission unit) before rotating this device.
Bandwidth:This field provides the bandwidth when this device is undertaking tasks. You can get two
Note:
The bandwidth shall be in the complete accord between the
Frame Length:This field displays the frame length that the
Chapter 3 Basic Settings | - 12 - |