INSTALLATION

FINAL ADJUSTMENTS OF THE COMMAND CONSOLE

Loosen the screws on each

Slide the Console partially

of the front Z-Lock mounts.

out.

 

Use a fl athead screw

 

driver to slightly move the

 

Z-Locks out away from the

 

Console.

 

Tighten all the screws on

 

the front Z-Lock mounts.

 

Slide the Console in and

 

out to see if it moves

 

smoothly.

Go back to the rear of the rack and fully tighten the slide extension rail screws.

NOTE: A wrench may be necessary to hold the nut on the other side.

10

Doc# 27-0023UM Rev 1.0 Issued 09/04